Repairing Fiber Cement

Many reasons can arise that will cause one to repair the fiber cement that has been used as siding. Some of the most common causes that every homeowner should know regarding repairing fiber cement are:

Surface damage/damaged jointers

This can be caused by an impact to the surface in question. This could be due to a car, kicking or any other high impact actions that cause the surface to become damaged and also the jointers as well. If the size of the holes is 32mm then an exterior grade filler should be used. However, if the hole is larger than this then it will be necessary to remove the damaged fiber cement piece and replace it with a new one. If the jointer is damaged then these will have to be taken and replaced as well. Once again, work that involved fiber cement is not a DIY task you will have to get additional help from a professional.

De-laminating edges

Whenever there are signs that the edges are breaking away from their support then this is a clear sign that the area has too much moisture. This has be fixed by ensuring that the fiber cement siding is not in contact with the soil and if so then this extra soil has to be removed. You may also want to take the opportunity to ensure than there are another leaking issues to take care of. Do not leave the damaged siding to drain and dry, because it will be as it was before. Remove the damaged siding and all the wall frames that as well.

Cracks that are obvious

It is important that are the manufacturer's instructions are observes regarding the installation of this types of siding. This is to avoid the flushing of finished joints or exposing joints. If there is a need to re-so the whole system then try calling a professional to get this done.